Farm Fence Solutions":1c6z5c7o said:.............. You can pound a nail in with a wrench, but you can't torque a bolt with a hammer.
Yes you can and I've done it....if you add a chisel. The chisel will bite into the hex ears and do the job. Application was a place where I couldn't get a wrench in to an area where I had to remove and reinstall a bolt. Gotta make do with what you have.
Now on the trucks, no comment. I know my little '11 4.8 gasser Silverado is ok fine alone but put a load on it, especially with wind resistance (16x6 stock trailer with tack room up front), even with tow-haul, get over 55 and she starts asking for forgiveness. But that's fine as the trailer is a once a year event; chores are an every day type thing.