I was sitting still just above idle unloading grain tank on combine, when empty I shut the auger off and engine died just like I shut key off. The unload auger is mechanically engaged with no electrical wires anywhere near the area so I think the engine dieing at the same time auger was disengaged is a coincidence. Turned key and nothing, no power to any gauges, will not turn over. Turn key to auxillary position and gauges, lights work. Took the console off to see if there was a loose wire or something, didn`t find anything but when I tried the key again now have power to gauges but still won`t over and fuel pump does not come on.
Sooo... Engine dies because of lack of fuel and the fact that the fuel pump does't come on when I turn the key points me in that direction. But shouldn't the engine at least still turn over? And with the switch kind of acting erratic, I am thinking electrical? Any ideas? I really struggle with electrical issues.
Sooo... Engine dies because of lack of fuel and the fact that the fuel pump does't come on when I turn the key points me in that direction. But shouldn't the engine at least still turn over? And with the switch kind of acting erratic, I am thinking electrical? Any ideas? I really struggle with electrical issues.