I have a 3/4 hp submersible pump in my water well. It won't kick on. The points on the pressure switch looked worn so I replaced them which I usually do once every year or so, but that didn't help. I don't do electical so I had a friend replace the 30 amp breaker at the breaker box and still nothing. I noticed the pressure switch valve or guage is stuck on 60 psi but there is no water in the tank. If the guage is stuck or the tube to the guage is clogged and it shows pressure will that keep the pressure switch and pump from cycling on? I have a water well service coming out this evening to check everything out but if I can troubleshoot the problem and fix it myself it will save me some money. I'm hoping my pump hasn't gone out, it is about 8 years old. Comments, hints or suggestions welcome.