Lucky_P
Well-known member
Grr. Limb broke the exhaust pipe loose from the muffler on the Kubota M9000 on Saturday, inside the cowling, right where it makes a 90-degree turn.
If I can get the muffler off (looks like new!), I'm pretty sure the guys at the local exhaust/radiator shop can weld the exhaust pipe back on. Four 14mm bolts holding it to the exhaust manifold. I can't budge them. Been soaking them with PB Blaster for lack of any other ideas on my part.
Got any tips for breaking those babies loose without rounding them off or twisting the bolt off?
If I can get the muffler off (looks like new!), I'm pretty sure the guys at the local exhaust/radiator shop can weld the exhaust pipe back on. Four 14mm bolts holding it to the exhaust manifold. I can't budge them. Been soaking them with PB Blaster for lack of any other ideas on my part.
Got any tips for breaking those babies loose without rounding them off or twisting the bolt off?