2013 Kubota M7040 value

[tom4018]

Considering a used cab tractor. 2013 Kubota M7040 hydraulic shuttle with 1130 hours. Only seen pics looks straight but faded some. Tires are fair probably less than half. Interior looks clean. What's a fair value?

 

[kenny thomas]

No idea on value but the fading is common especially if they have been left outside a lot.

 

[tom4018]

No idea on value but the fading is common especially if they have been left outside a lot.

I wouldn't think 1130 hours would have hurt it. Got a 2008 M7040 with 2500 on it with no issues so far. Wanting to get out of the heat, dust and cold.

 

[kenny thomas]

I wouldn't think 1130 hours would have hurt it. Got a 2008 M7040 with 2500 on it with no issues so far. Wanting to get out of the heat, dust and cold.

The hours isnt bad at all. Is it 4x4

 

[tom4018]

The hours isnt bad at all. Is it 4x4

Yes.

 

[kenny thomas]

Yes.

Very nice size for all around small farming.

 

[bird dog]

35K to 40K if as good as you say with no leaks or damage.

 

[tom4018]

Very nice size for all around small farming.

I love my open station one, thinking of trading my 2wd John Deere to a cab tractor, priced new ones but really can't make them fit the budget

 

[tom4018]

35K to 40K if as good as you say with no leaks or damage.

They are on the low end of that, not seen in person yet.

 

[SmokinM]

Nice thing on the 7040 is pre-emissions. They are a handy tractor and I would rather have that at$35k than a new one for sure.

 

[jltrent]

I have a M6800, the M7040 replaced. I have around 2500 hours and no problems that I remember. As mentioned 35k range.

 

[tom4018]

Has a little damage to plastic roof that I see in the pictures. Anyone ever repair one?
They have had it about 9 months. Seems eager to sell. He said 21 or 22 with my trade which other dealers are saying 14-16.

 

[kenny thomas]

I would have them repair the roof and any water damage under it.

 

[Col Reb]

Yes, it can be repaired but need to pull roof skin off. Use fiberglass or other type mesh on bottom side. V it out on top side with no mesh. Sand it down with some 80 & then 180 grit. Use some bulldog plastic adhesive spray then prime it.
Water sand the whole roof with 320 or 400 grit, bulldog the whole roof & paint it. Labor intensive but can be done cheaper than a new roof.

 

[Col Reb]

Fixed a roof on a 2640 which is a similar plastic years ago & still holding.

 

[tom4018]

Yes, it can be repaired but need to pull roof skin off. Use fiberglass or other type mesh on bottom side. V it out on top side with no mesh. Sand it down with some 80 & then 180 grit. Use some bulldog plastic adhesive spray then prime it.
Water sand the whole roof with 320 or 400 grit, bulldog the whole roof & paint it. Labor intensive but can be done cheaper than a new roof.

Is the pic what you are calling Bulldog?

 

[Col Reb]

No, that's the plastic repair product. The bulldog is a spray adhesive. You can get the bulldog at oreilly auto parts around home.

 

[Col Reb]

Or get it on amazon

 

[Col Reb]

Paint nor primer will stick to plastic without some sort of adhesive promoter.

 

[Col Reb]

Google the 3m plastic repair. There's videos on proper use.