Search results for query: *

Needing a fourwheel drive (around a 40 hp) kubota for bush hogging, seeing a lot of hydrostats for sale, any comments about how they hold up doing farm work, hay loading etc. Thanks ! RCP

I started building a hay un-roller, and had an old man ask me why didn't I just use the front wheel of my tractor like he does ? I tried it and it worked fine on JD bales, just aim for the middle and take off. I did find out it will only work on hard solid rolls (others just mashin. Good luck. RCP

My clutch has started drooping to the floorboard. Then can't shift the trans. Pick it back up to the top and then can depress it and shift just fine, later just droops again etc etc. I was wondering if it might have air in the system that needs to be bled out ?? Thanks in advance for your...

Just purchased this tractor, no manuals, can someone help me with the Hyd. filter location. Is it a sreeen type and where is it located. Lift won't raise, fluid low and milky. Want to change it out. Thanks RCP

Maybe 1/2 inch c shape

I just bought new pair of dirt devil tires for the front of my 3010 mule. Two days later go thru some grass with a hayrake hitch hidden therein( I don't know who parked the thing ) ?? O.K.,,,I job a hole in the sidewall of my new tire. I go back to the dealer, nope can't fixit. I said Well I...

I've got a 10 " hog, been pulling is with a 4020 JD. Some of my ground is wet, even now when we're nearly in a drought. I was stuck twice over the weekend, I get stuck in these fields every year. I am through! I need advice. I am about to go and buy a 4 wheel drive tractor, never had one, never...

Does anyone have any thoughts on the SPM 5410 models built in OK, they are the two wheel variety, with both wheels straight across from each other, instead of staggered. Please help, rcp

Since everyone usually has got an opinion, I am in the market for a mower caddy. I have only found two so far, vassar and SPM 5410. I am leaning toward the latter due to having only two wheels and better balance. Any help would be appreciated. rcp

He told me to try it and if he needed to come over and adjust more he would, but I think he needs a little more information than I can give??rcp

I just had a shop put a clutch in a older model 4020. It just doesn't feel right, or least it seems to be sticking a little, hard to push in and the gears seem to be clashing. I told him the tech manual that I had said to run the rpm @1900 to do a proper adjustment,on the clutch ( I really don't...

Before you buy an unroller, try using your front tractor wheel against the center of the bale. I was building an unroller, an elderly farmer told me this I tried it and it works great.There is one catch, it works best on hard solid center rolls. I have a JD 435 and it works great, but I tried it...

Thanks for the pictures. I have a couple of questions to ask somebody. 1. What is the most used strainer/filter coming out of the tank so everything won't get clogged up ? 2. When using a weed wick, I have a 10' by 3" pvc one and I need to know when it is out of pesticide? I need some kind of...

Me and Bez could work together, 1994 GMC 1/2 ton with a 6cyl. My new truck is a 1995 1 ton Dodge Diesel flatbed. Since my wife made me quit dating about 30 years ago, the only time they get washed is when it rains rcp.

I talked with someone here last year about these mowers, and they had added some counterweights to the left side. They also had some info about using these mowers and hooking them up. I sure need some help please.rcp :help:

Well I am not sure what you mean by roller height, but my drawbar going into the baler hitch is straight, and the heavy tongue weight of the baler rides on top of the drawbar. any forward or backward pressure on the pin makes it impossible to remove the pin. and I mean any, since I have hardly...

I have absolutely no tolerance of slack at the pin connection. This is a Jd cab /air tractor and a JD baler and a connecting JD pin . At times even when I unhook in the barn I sometimes need a hammer to drive it back up, so it is impossible to just pull the pin, I may need to go to a smaller...

The tongue weight prevents " just pulling the pin out" It has to be jacked up and aligned just right, (which is not going to happen when you need it to) so I have been toying with the idea to use a pintle hitch sideways, but the question is will it release under pressure? rcp

I am trying to invent, buy, steal, whatever, a quick way to unhook my roundbaler from my JD tractor. A lot of balers and tractors go up in smoke because folks cannot get loose from them in a hurry. Help !! before the next one is me.rcp :help:

I have been thinking about possibly using a paintball gun to mark spots on my right side ( for spraying) paint balls are cheap and the guns are too, compared to foam markers, what do you think?