• If you are having problems logging in please use the Contact Us in the lower right hand corner of the forum page for assistance.

4020 Clutch

RCP

Well-known member
Joined
Jun 14, 2006
Messages
66
Reaction score
0
Location
Central Arkansas
I just had a shop put a clutch in a older model 4020. It just doesn't feel right, or least it seems to be sticking a little, hard to push in and the gears seem to be clashing. I told him the tech manual that I had said to run the rpm @1900 to do a proper adjustment,on the clutch ( I really don't think he did that). Any ideas ?rcp
 

shorty

Well-known member
Joined
Feb 20, 2004
Messages
1,013
Reaction score
0
Location
eastern pennsylvania
What did he say when you told him you didn't think it was right ? If he's a good mechanic he should stand behind his work.
 

RCP

Well-known member
Joined
Jun 14, 2006
Messages
66
Reaction score
0
Location
Central Arkansas
He told me to try it and if he needed to come over and adjust more he would, but I think he needs a little more information than I can give??rcp
 

DiamondSCattleCo

Well-known member
Joined
Dec 7, 2005
Messages
1,373
Reaction score
0
Location
NE Saskatchewan
How much pedal free play is there? There should be around 1.5 inches. The 4020 isn't real picky.

And forget about the whole "run it at X RPMs". The 4020 doesn't have inertial pressure plate fingers anyway, so if changing the RPM changes pedal free play any more than a couple mils, there are other issues.

Rod
 

EAT BEEF

Well-known member
Joined
Jan 27, 2008
Messages
928
Reaction score
0
I think there are 2 options for a 4020,but I don't know much about them.My 4020 has a very stiff clutch,but the gears don't grind or anything.
 
Top