Rydero
Well-known member
At the end of last season my 1475 New Holland haybine didn't want to lift the header on one side. I looked at the time and figured something with the mechanism or maybe the lift cylinder. Trying to be proactive so I started working on it a few weeks ago and I noticed a crack in the frame that goes across the trailer where the cylinder to turn it and the springs for the header attach.
Figured IF it could be fixed the header needed to come off and by the time I was done removing it she was almost broke right off. Had to use 2 tractors - one to move the turn cylinder to pull the frame together and one to lift and twist the frame just to somewhat (and terribly) patch it good enough to at least move it around.
Figured IF it could be fixed the header needed to come off and by the time I was done removing it she was almost broke right off. Had to use 2 tractors - one to move the turn cylinder to pull the frame together and one to lift and twist the frame just to somewhat (and terribly) patch it good enough to at least move it around.