BK9954
Well-known member
What kind of post can I put without putting too much material for a 2 wire electric fence. When the back half of the property is sold off in 4 to 5 years I am going to have to pull all this fencing off. Dont want to put full sizr H Frames. I read this article but dont understand the braces it is talking about. Can anyone help. What is just an " angle brace"?
"Every line of electric fencing needs to be supported by tying off to a brace post at both ends of the fence line. However, the traditional H-braces used for barbed wire cattle fencing are overkill for most electric fences because you are not building a high-tension fence. Use Angle Braces for multi-strand boundary fences and the even simpler Bedlog Brace on single-wire electric fences. You will find images and descriptions of how to build angle braces and bedlog braces on page 74 of Grass-Fed Cattle."
"Every line of electric fencing needs to be supported by tying off to a brace post at both ends of the fence line. However, the traditional H-braces used for barbed wire cattle fencing are overkill for most electric fences because you are not building a high-tension fence. Use Angle Braces for multi-strand boundary fences and the even simpler Bedlog Brace on single-wire electric fences. You will find images and descriptions of how to build angle braces and bedlog braces on page 74 of Grass-Fed Cattle."