Search results for query: *

I have a JD 4630 with a power shift in it, Was in park ( I was not in tractor) filling a sprayer on a slight incline and was about full (1350 Gallons), when it jumped out park, rolled back about three feet and jumped back in park!! When I got into the tractor I checked the shifter seemed to be...

RCP, I have to agree, depends what you need it for, very handy as a loader tractor and yard tractor. Not made for a hard pulling farming tractor where you need full time power even when not using it at full power. The Hydros. when pulling steady will get too hot in my opinion? I've only had a...

Did you buy the truck new? Some folks around here order their new trucks without the bed, I will ask what it saved them to buy without the bed, I was on Interstate 90 a few weeks ago and saw a load of trucks and some were without beds also. Good luck with your new truck! 101

I see reading my post that I did not tell you all the model of my deere, it was a 1520, don't remember the year but was made in the early 70's I think!!! 101

Well mine was a Deere !!! A 40 - 45 Hp 3 cylinder, couldn't start it when hot, needed it tied to a light pole below 30 degrees, ran so hot you couldn't stand sit on it when haying from blowing the hot air from tran, and motor, and if you could keep the clutch and rear end in it, it would burn...

Kingfisher; I don't know what your speaking of an Orchard gun?? The spray hand gun I was speaking of is just a heavy duty trigger operared pistol grip with a dripless variable nozzle. Mine has a 12' foldable boom with 18' foot Boominator nozzles on the end of each foldable side so i can spray...

Skyhightree1 I have a little general purpose trailer sprayer, 200 tank, 3300 pay load, 15" tires, tail lights, 2" ball hitch, that you can have it set up like you want, mine has a honda engine, with a 12 folding boom with 18' boomless nozzles on each side end, has electric solenoid control so...

I never owned an 855, had a neighbor that had, he thought it was a heck of a baler other than the air bags, he said he could bale anything, he said the bags were expensive to replace and not to store it outside because the sun was hard on them. I'm not sure maybe not all the 855s had the bags...

I can't tell where your at ?? How far do you have to go ?? I have a Swather trailer that works really good, I can go about 45 MPH with no problems, and have pulled it about 125 miles one way but would just as soon not go much futher and if road is narrow you would want someone to flag for ya ...

I think that hay-bine has an enclosed hydraulic system with the oil reserve in the tounge and that the pto pump runs the cutter, your tractor hydraulics lift the cutter and swings it from side to side !! If the pump is run very much with a bad seal or low on oil it will quickly ruin the case...

Galloway2, now that sounds interesting, I have not heard of anything like that before I will look around and see what I can come up with, the hardest it would be worked is on the baler and I usually like my bales around 1050# to 1100#, just easy'er to haul 2 at a time with the loader so the...

Thanks DirtyShame for the help, We did pick up the tractor, have not used it much yet, will put my loader on it soon and see how it goes, we can put it to work even with the 1000 pto. Thanks again all! 101

Yes jedstivers !!! I know all about the JD 30 series and electricity, I was hoping the newer engine might start better, I will say this JD 7700 will start, we had it away from home one time and way below 0 and it never turned over twice before it was running, just don't want to do that again...

Thanks OleScout !! We have had a 1977 4430 with a PQ tran. for years, also a JD 7700 MFD, and I like to drive the 4430 except when bad mud or on ice !! We drove this the 4630 the other day and it felt just like our 4430, this 4630 has a PS and has been up dated with a 40 series engine and...

Thanks jedstivers for the help, I was thinking of useing the tractor on my 688 baler that is 540, I will see about going to a 1000 gear box and drive chaft !! Again thanks for your help. 101

Thanks James T for your help, I had a feeling it would not be simple like the smaller JD 4430's with just switching one shaft for the other, We do have a one or two good JD mechanics around that I can visit with, Thanks again for your help. 101

I have found a JD 4630 that am thinking of buying, i have a loader with mounts that will work on it, the price is right and I just want a second tractor to have around when hauling hay to unload trucks and for other busy times and was woundering if I could switch the 1000 PTO to a 540 like you...

Hello !! Seems many years ago I had, if I remember the year correctly a 1968 930 Case Comfort King, It was a good tractor in those days, had a hand clutch, Egging cab, with add on air that even worked Ha ! The tractor I had was what they called a Western Special, was 80 - 90 H. P. rated. This...