midTN_Brangusman
Well-known member
callmefence":3c2gpjfi said:
Fence I use the same contraption on a hay spear on my flatbed. The disc works great!
Love the sticker btw
callmefence":3c2gpjfi said:
That's my one complaint about Bakeart ht barbwire. No real spool on their rolls. Those 2 little plastic things ain't worth a crap when you get down close to the end of the roll.callmefence":l4cfgwya said:
greybeard":31axsbte said:That's my one complaint about Bakeart ht barbwire. No real spool on their rolls. Those 2 little plastic things ain't worth a crap when you get down close to the end of the roll.callmefence":31axsbte said:
callmefence":2e3nluxf said:
Farm Fence Solutions":oh7yozao said:callmefence":oh7yozao said:
A Hoosier, a New Yorker, and a Texan show up on a fence job......
dieselbeef":2pairmay said:that wire wont do that with the metal frame like that?
greybeard":2k96ap6g said:dieselbeef":2k96ap6g said:that wire wont do that with the metal frame like that?
Every once in awhile, but not nearly as bad.
Years ago, decades..all wire I used came on a spool frame like that, but the wire itself had it's own problems. Stretch and stretch and stretch, then get loose again just on it's own and it rusted all the heck. It's why I started using Bekeart ht. A little harder to work with according to some, but in 5 years, it don't look like it was put up in the late 1800s.
Says the guy that's rolling wire out from the wrong side. You have the roll on upside down. Everyone knows that in this hemisphere, you have to unroll it off the other (right) side and if the roll is sitting horizontal, it has to come off from the top of the roll and not the bottom...callmefence":1ymy8dko said:
greybeard":3e5zc27u said:Says the guy that's rolling wire out from the wrong side. You have the roll on upside down. Everyone knows that in this hemisphere, you have to unroll it off the other (right) side and if the roll is sitting horizontal, it has to come off from the top of the roll and not the bottom...callmefence":3e5zc27u said:
callmefence":5dglhlhn said:greybeard":5dglhlhn said:Says the guy that's rolling wire out from the wrong side. You have the roll on upside down. Everyone knows that in this hemisphere, you have to unroll it off the other (right) side and if the roll is sitting horizontal, it has to come off from the top of the roll and not the bottom...callmefence":5dglhlhn said:
Good eye Greybeard.. :clap:
It does make a slight difference. Agreed. Not as big a difference as toilet paper. I just threw a partial roll up there for the photo and didn't pay attention. You caught me..
Just 1/2 of them...Farm Fence Solutions":1kpyidkq said:But then, if you were going south, the barbs would be upside down....wouldn't they? :???:
greybeard":1hqfpwlx said:Just 1/2 of them...Farm Fence Solutions":1hqfpwlx said:But then, if you were going south, the barbs would be upside down....wouldn't they? :???:
callmefence":2kwxooit said:We always roll out the bottom wire backwards on purpose so the barbs point down.
Makes the pigs squeak.
Farm Fence Solutions":33z5bwii said:greybeard":33z5bwii said:Just 1/2 of them...Farm Fence Solutions":33z5bwii said:But then, if you were going south, the barbs would be upside down....wouldn't they? :???:
Seems like twice as many would be upside down if it was 4 point instead of 2 point??? You sure it's just half?