Rafter S
Well-known member
I have some other pens with cattle panels. Those have only 3 boards; top, bottom, and near the middle.
Rafter S":1vmv3eme said:I have some other pens with cattle panels. Those have only 3 boards; top, bottom, and near the middle.
jedstivers":3to5f7zg said:Y'all do realize continuous fence is not a bad price per foot too don't you?
I'm going to expand my feedlot and I'm having a hard time coming up with something cheaper.
Now in the pressure areas it takes the more expensive cf or use pipe or heavy timber but the pens can be the lighter stuff. Gobob has a good price but I'm sure others do to. I haven't found any to beat Gobob though.
Would depend on the amperage of the welder. I don't think I'd want to use less than a 140, which I think is the smallest 120v welder you can get.Bigfoot":2yjsvce4 said:Will a 120 volt wire feed weld that stuff to a pipe post? If it will, I can get along with it, if it won't, I'd have to hire it done.
I've never used a 120 so I don't know. You can use self tapping screws on a heavy wall post to you can prol rent a welder if yin close to a larger urban area.Bigfoot":3ildu84u said:jedstivers":3ildu84u said:Y'all do realize continuous fence is not a bad price per foot too don't you?
I'm going to expand my feedlot and I'm having a hard time coming up with something cheaper.
Now in the pressure areas it takes the more expensive cf or use pipe or heavy timber but the pens can be the lighter stuff. Gobob has a good price but I'm sure others do to. I haven't found any to beat Gobob though.
Will a 120 volt wire feed weld that stuff to a pipe post? If it will, I can get along with it, if it won't, I'd have to hire it done.