C Carlos D. Well-known member Joined Apr 4, 2005 Messages 690 Reaction score 2 Location Southwestern Manitoba, Canada Oct 25, 2013 #1 makes about 65 good bales and then starts to miss tying on left and knotter any ideas why
dun Well-known member Joined Dec 28, 2003 Messages 47,334 Reaction score 27 Location MO Ozarks Oct 25, 2013 #2 There are 2 reasons I've seen. One is not enough grease the other is the knotter get's jammed up with too much junk (twine scraps)
There are 2 reasons I've seen. One is not enough grease the other is the knotter get's jammed up with too much junk (twine scraps)
C Cabo Well-known member Joined Jan 26, 2006 Messages 1,335 Reaction score 0 Location Southwest TN Oct 25, 2013 #3 There is a small flat spring that is attached by a 5/16 bolt. Try tightening it 1/6 of a turn. Fixed mine.
There is a small flat spring that is attached by a 5/16 bolt. Try tightening it 1/6 of a turn. Fixed mine.