Model B Van Brunt part needed

[bird dog]

The plate, Gear hanger on my model B drill broke where the gear bolts on. I believe it is part # H 206M. It appears to be a cast part. I found the gear in the pasture with the bolt still attached. Anyone have a salvage one laying out in the pasture or know where I might get this part? It is Saturday so no one is open to call but I thought ya'll might have some ideas.
Thanks in advance,
bird dog

 

[Aaron]

http://www.burrells.net/

 

[dun]

When I had them, the best source I found was in farmers old junk piles/lots. Not woring I could buy them for less then a 100 bucks and have all the spare parts I would need. I fixed up a coule of them and sold them for decent profit to folks that wanted to just seed foodplots and stuff

 

[bird dog]

Thanks Arron. I forgot about those guys. I got the broke part off today and I was looking at the parts diagram bass ackwords. It is actually part # H 203M. It is called a "pivot gear hanger". It is a round cast part with two wings where the bolts go. Naturally you have to take off the chain cover on the ends to access one of the bolts. I don't think this old drill has ever been taken a part. 40 years worth of grease, dirt, sticks and other gunk caked up inside the chain covers.

The part is actually available online @ greenfarmparts.com where I got the parts lists and diagrams. A new part $64.01 I love the internet. Now we'll see if I can get it back together.