bale processor

[kiend17]

im new here. been reading for a while joined a few days ago. has any one ever used a tractor with 540 pto on a 1000 rpm bale processor and just run the tractor at full throtol instead of pto rpm?
i wanna run my 180 that runs at 1800 for pto rpm but it runs 2200 at full throtel

 

[ga.prime]

You know you can pull the pto output shaft on the tractor out, flip it around (reverse ends on it), put it back in, and make it into a 1000 rpm shaft, right? Not hard to do.

 

[kiend17]

Not on a 180 allis you can't unless you have the dual speed PTO and mine ain't got it

 

[James T]

A PTO adapter may not be wise: "If an implement that is designed for 1,000 rpm is run at 540 rpm, implement damage from excessive torque on the implement driveline can occur." "To change operating speed of an implement requires gear case changes.
Changing only the implement driveline will not convert the implement from one PTO speed to the other. "