5610 Remote leaking

Joined
Jun 8, 2019
Messages
2,978
City & State/Province
East TN
This will be the 4th time in two years ive replaced o-rings in the same remote set. Im using o rings from new holland. Its always the one on top, right hand side.

Tractor has dual rear remote setup since new. Its a 93 model, only 850 hours.

Is there something deeper thats causing the issue? Or just part of it with these tractors?
 
As an Amazon Associate we earn from qualifying purchases. Product prices and availability are accurate as of the date/time indicated and are subject to change.
Check the male couplers for damage as said. Make sure both the male and female couplers are clean.

You can replace the cartridge in the female couplers but they are like 400 bucks a piece or 700 a pair.

I've got nearly 20k hours on those remote valves and only replace the o rings and seals never the entire cartridge.
 
First I'll acknowledge there's someone above far more knowledgeable than me on this subject.
I don't think there's much that can go wrong with the cartridge itself , but I've heard of them being defective from the factory ( milled out of specs?) I would certainly check the males on every implement i had for damage or rust that might be damaging orings.
 
Inspect the steel faces around the o-ring groove in the cartridge to make sure there isn't any nicks or blemishes in there. Any damage can compromise the o-ring when installing it.
 

Attachments

  • 20260407_095021.jpg
    20260407_095021.jpg
    688 KB
  • 20260407_095600.jpg
    20260407_095600.jpg
    637.1 KB
  • 20260407_095610.jpg
    20260407_095610.jpg
    694 KB
I forgot to ask is it leaking from where the male coupler goes into the female? Or where the cartridge screws into the valve body?

Any leakage from the bottom drain hose?
 

Latest posts

Back
Top