5075 fuel problem.

Rain on a freshly baled hay field is very nice bonus for your troubles. As far as the fishing goes you should never need an excuse to go.
 
That fuel filter assy looks very similar to the one on my NH skid steer and one of the NH tractors. Both of them have an electric fuel pump mounted on top where the black primer plunger is mounted with the knurled black ring. Wondering if a fuel pump could be retrofitted to that assy?
I could be mistaken but it seems in all my reading on this system I read a post about someone doing just that. It sure seems it would be better than gravity and suction from the injection pump. Especially under load with a low fuel tank.
 
I could be mistaken but it seems in all my reading on this system I read a post about someone doing just that. It sure seems it would be better than gravity and suction from the injection pump. Especially under load with a low fuel tank.
The JD parts link I posted up above shows a fuel lift pump on a 5075E. Does your tractor have that fuel pump? Item 2 in the link below. Seems strange that the original design would have both a fuel lift pump before the filter/separator as well as a manual primer.

If you don't have a lift pump, it is pretty easy to add one inline. Power it from the fuel solenoid on the injector pump.

https://partscatalog.deere.com/jdrc/sidebyside/equipment/4219/referrer/navigation/pgId/746896
 
The JD parts link I posted up above shows a fuel lift pump on a 5075E. Does your tractor have that fuel pump? Item 2 in the link below. Seems strange that the original design would have both a fuel lift pump before the filter/separator as well as a manual primer.

If you don't have a lift pump, it is pretty easy to add one inline. Power it from the fuel solenoid on the injector pump.

https://partscatalog.deere.com/jdrc/sidebyside/equipment/4219/referrer/navigation/pgId/746896
No . Some have it some don't. I think it depends on the country it was made in. Not sure. This definitely doesn't have it. My john deere skid steer has a similar system and a very small inline pump. You don't have to pump a primer after filter change. Just turn it on and wait about 60 seconds it self primes.
 
That fuel filter assy looks very similar to the one on my NH skid steer and one of the NH tractors. Both of them have an electric fuel pump mounted on top where the black primer plunger is mounted with the knurled black ring. Wondering if a fuel pump could be retrofitted to that assy?
we have a couple of older tractors that seem to come up withfuel issues and we installed a small electric fuel pump on there that came from oreilly's and it solved the issue for us
 
not sure what style they are, Oreilly's just has a couple dofferent ones hanging on the wall, only one says diesel so that's what we use. They're pretty cheap and seem to last 2 or 3 years, cost about 60 or 70 bucks if I remember right. They make priming super easy as well
 

Latest posts

Back
Top