Gas powered post driver

snoopdog

Well-known member
Joined
Mar 25, 2017
Messages
1,841
City & State/Province
ne oklahoma
So, after some research and pounding a bunch in the ground by hand, I decided to purchase one. Extremely rocky here, so got one of the heavier models (titan 3875). I'm finding that I still have to use the punchbar for a guide hole to keep the tposts from twisting, and I'm ok with it, but dang that thing is unwieldy 6ft in the air. Anybody else use one of these?/tips.
 
Fence building in the fall when ground is hard is not a good time or at least around here. Building in the spring I can sink a 6' steel post with three licks. Hitting those rocks can sure jar your teeth. I have tried the gas operated post drivers and by the time I put the heavy contraption on the post I could already had it sunk. If I was in the fence building business one of those would come in handy daily though. Just eat your Wheaties before you start might be a good tip.
 
Fence building in the fall when ground is hard is not a good time or at least around here. Building in the spring I can sink a 6' steel post with three licks. Hitting those rocks can sure jar your teeth. I have tried the gas operated post drivers and by the time I put the heavy contraption on the post I could already had it sunk. If I was in the fence building business one of those would come in handy daily though. Just eat your Wheaties before you start might be a good tip.
Yes, that is a very good tip
 
Used one rebuilding fences after a big fire in the Okanogan. By yourself it was a workout. We found 3 guys working together it went fast and smooth. Man with the driver standing on a flatbed. A man driving the pickup. And a fellow on the ground standing up the posts/lining them up.
 
Used one rebuilding fences after a big fire in the Okanogan. By yourself it was a workout. We found 3 guys working together it went fast and smooth. Man with the driver standing on a flatbed. A man driving the pickup. And a fellow on the ground standing up the posts/lining them up.
I can see that working good.
 
I also have one of the heavier Titian post drivers. After driving 2 7/8 pipes and many T- posts by myself, I’d had enough of near falls and not quite square posts in the ground. I knew there had to be a better way if I was going to be self reliant.

I used some 2 inch square tubing to build a set of second hands. The tubing fits inside my truck’s receiver hitch, it comes straight out (of the receiver) about three feet (to clear the open tailgate) and does a 90 degree turn straight up for six feet and then does a 45 degree turn straight back.

About half way up the six foot section I attached a manual boat winch that locks in either direction (pay out or reeling in). On the winch I used wire cable. I used a pulley connected at the first point of the 45 degree turn and then another at the end of 45 degree tube. At the top pulley I connect the wire hook to a short chain connected to the handle of the post driver.
Using the winch system I can now drive posts without worry off the weight or balance of the driver.

One regret - it‘s pretty darn heavy but one man can get it into the receiver hitch or use a tractor to attach it to a truck.

If you have money to spare, there are alternatives using tractors and hydraulics to do it much easier.
 
As an Amazon Associate we earn from qualifying purchases. Product prices and availability are accurate as of the date/time indicated and are subject to change.
I also have one of the heavier Titian post drivers. After driving 2 7/8 pipes and many T- posts by myself, I’d had enough of near falls and not quite square posts in the ground. I knew there had to be a better way if I was going to be self reliant.

I used some 2 inch square tubing to build a set of second hands. The tubing fits inside my truck’s receiver hitch, it comes straight out (of the receiver) about three feet (to clear the open tailgate) and does a 90 degree turn straight up for six feet and then does a 45 degree turn straight back.

About half way up the six foot section I attached a manual boat winch that locks in either direction (pay out or reeling in). On the winch I used wire cable. I used a pulley connected at the first point of the 45 degree turn and then another at the end of 45 degree tube. At the top pulley I connect the wire hook to a short chain connected to the handle of the post driver.
Using the winch system I can now drive posts without worry off the weight or balance of the driver.

One regret - it‘s pretty darn heavy but one man can get it into the receiver hitch or use a tractor to attach it to a truck.

If you have money to spare, there are alternatives using tractors and hydraulics to do it much easier.
Can you post a picture of this?
 
So, after some research and pounding a bunch in the ground by hand, I decided to purchase one. Extremely rocky here, so got one of the heavier models (titan 3875). I'm finding that I still have to use the punchbar for a guide hole to keep the tposts from twisting, and I'm ok with it, but dang that thing is unwieldy 6ft in the air. Anybody else use one of these?/tips.

Titan PGD2875 Gas-Powered Post driver is what I bought in e 2020. I wish I could just hire the fence crew I once could get but … now it is just us. Hearing protection needed and we use a auger on tractor to dig holes for brace posts. That driver is a great deal faster than the manual method. Rocky gravely soil here. I step up on something to hold it above T post but my husband doesn’t.
 
Can you post a picture of this?
Sure, sorry i‘s been awhile. I cover about 400 acres at three different locations. I took the pictures with a 6 foot box blade in the frame for size reference.
 

Attachments

  • 34D31FAA-6B8B-40AB-8ACC-BCEC82BA59E3.jpeg
    34D31FAA-6B8B-40AB-8ACC-BCEC82BA59E3.jpeg
    2.3 MB
  • 0D392F07-6E5A-47AA-AACC-2621D9823622.jpeg
    0D392F07-6E5A-47AA-AACC-2621D9823622.jpeg
    2.5 MB
  • 24754ADE-BAAD-41F3-8AC4-72DEB1EBDE1D.jpeg
    24754ADE-BAAD-41F3-8AC4-72DEB1EBDE1D.jpeg
    3.9 MB
  • 2CD5D24C-1D29-489D-BC5B-48BBD7C2437A.jpeg
    2CD5D24C-1D29-489D-BC5B-48BBD7C2437A.jpeg
    3.7 MB
  • F76A66F3-CB01-4B54-8BF9-2C6D2858B867.jpeg
    F76A66F3-CB01-4B54-8BF9-2C6D2858B867.jpeg
    4.9 MB

Latest posts

Back
Top