Menu
Forums
New posts
Search forums
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Forums
Cattle Boards
Trucks, Tractors & Machinery
Need help with my shredder!
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support CattleToday:
Message
<blockquote data-quote="hurleyjd" data-source="post: 1255258" data-attributes="member: 4674"><p>You might turn the shredder over. Remove the nut and spray with a good penetrating oil. Make two wood wedges to hammer on opposite sides and between the blade carrier and the under side of the shredder. If it does not come off then replace the nut but do not tighten take a big hammer and strike the nut. Carrier should come off. the seal can be removed with out taking the gear box apart. I drill a small drill and drill a hole in the seal. Screw a sheet metal screw into the seal and you should be able to pull it out.</p></blockquote><p></p>
[QUOTE="hurleyjd, post: 1255258, member: 4674"] You might turn the shredder over. Remove the nut and spray with a good penetrating oil. Make two wood wedges to hammer on opposite sides and between the blade carrier and the under side of the shredder. If it does not come off then replace the nut but do not tighten take a big hammer and strike the nut. Carrier should come off. the seal can be removed with out taking the gear box apart. I drill a small drill and drill a hole in the seal. Screw a sheet metal screw into the seal and you should be able to pull it out. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Cattle Boards
Trucks, Tractors & Machinery
Need help with my shredder!
Top