Engineering

Mechanical EngineeringQ&A LibraryProblem 17.3: the ideal cycle time of an assembly machine is 5 sec. the parts feeder at one of the workstations has a feed rate of 75 components/min and the probability that the components will pass through the selector is 18%. The active length of the feed track (where the high-level sensor is located) is 350mm. the low-level sensor on the feed track is located 100mm from the station work head. The components have a length of 12.5mm in the feed track direction, and there is no overlapping of parts. (a) How long will it take for the supply of parts to be depleted from the high-level sensor to the low-level sensor once the feeder-selector device is turned off? (b) How long will it take for the parts to be resupplied from the low-level sensor to the high-level sensor, on average, after the feeder-selector device is turned on and turned off?Start your trial now! First week only $4.99!*arrow_forward*

Question

Problem 17.3: the ideal cycle time of an assembly machine is 5 sec. the parts feeder at one of the workstations has a feed rate of 75 components/min and the probability that the components will pass through the selector is 18%. The active length of the feed track (where the high-level sensor is located) is 350mm. the low-level sensor on the feed track is located 100mm from the station work head. The components have a length of 12.5mm in the feed track direction, and there is no overlapping of parts. (a) How long will it take for the supply of parts to be depleted from the high-level sensor to the low-level sensor once the feeder-selector device is turned off? (b) How long will it take for the parts to be resupplied from the low-level sensor to the high-level sensor, on average, after the feeder-selector device is turned on and turned off?

Tagged in

Engineering

Mechanical Engineering

Find answers to questions asked by students like you.

Q: Shoes are to be designed to enable people of up to 80 kg to walk on freshwater or seawater. The shoe...

A: Given : The weight of the people = 80 kg The density of water = 1000 kg/m3 Solution: The equivalent ...

Q: May you please explain each steps. Thank you

A: Drawing the P-V and T-S diagram of the cycle – The four-stroke engine cycle is shown in the figure. ...

Q: Which of the following are forming operations (Please select all that apply) Extrusion Die casting R...

A: Forming: Metal forming is a process of converting the material by using suitable stresses like compr...

Q: Explain and write legibly

A: It has been two choices to choose the fin. We have to decide which is suitable for quick heat transf...

Q: Technician A says a wheel alignment rack should include rear slip plates. Technician B says a four w...

A: During the alignment lift operation, it is necessary to take off slip plates. To give a better wheel...

Q: What is gyrocompass?

A: Gyrocompass It is a non-magnetic compass used for determining the heading of a vehicle. The gyroscop...

Q: PLEASE ANSWER QUICKLY

A: Given data as per question Diameter = 2 in Length of bar =24 in Moment = 12000 to 18000 in lb. Becau...

Q: Psychrometric process A room has dimensions of approximately 10m x 10m x 3m. Assume the air inside t...

A: Given: Given: The temperature of air inside the room, T = 20 °C The pressure of air inside the room...

Q: Explain why the momentum correction factor is smaller for a turbulent flow compared to a laminar flo...

A: Momentum correction factor: The moment across a section can be calculated based on actual velocity a...

Q: A semicircular 40-ft-diameter tunnel is to be built under a 150-ft-deep, 800-ft-long lake. Determine...

A: Given data: Depth of the lake, hd =150 ft Length of the lake, l = 800 ft Diameter of tunnel, d = 40 ...

Q: A force of 500 N forms angles of 60°, 45°, and 120°, respectively, with the x, y, and z axes. Find t...

A: Given data:

Q: Describe how caster adjustment may be used to compensate for road crown.

A: There are many ways to adjust the caster angle which are used to compensate for road crown. These ar...

Q: Find the distance z¯ from the vertex of the right-circular cone to the centroid of its volume.

A: First consider a thin disc at a distance of z from the vertex of cone. The radius of the disc consid...

Q: The mechanism forms a structure, when the number of degrees of freedom (W) is equal to

A: Structure-It is a combination of links in which there is no relative motion between them. Links only...

Q: *19-36. The satellite has a mass of 200 kg and a radius of gyration about z axis of k, = 0.1 m, excl...

A: Given data:

Q: Consider a cubical water tank with a side length of 3 m. The tank is half filled with water, and is ...

A: Given Data: Consider the diagram shown below for the initial condition when there is zero accelerat...

Q: In the photos it show the steps to solve for t(time), I don't know how they got .3924 towards the en...

A: The formula used for calculation of time is known as Fick’s second law formula Erf stands for error ...

Q: *13-88. Rod OA rotates counterclockwise with a constant angular velocity of ở = 5 rad/s. The double ...

A: Given data:

Q: F13–16. The 0.2-kg pin P is constrained to move in the smooth curved slot, which is defined by the l...

A: Given data: It is also given that the motion is in the vertical plane. Consider the diagram shown b...

Q: This is a dynamics problem. Answers: F = 60.88 lb, aG = 13.6 ft/s2, ...

A: Drawing free body diagram for the desk.

Q: 500 kN |20 kN 200 mm 1.50 m diameter 50 200 100 300 mm diameter 2.00 m (Dimensions are in mm) Fig. Q...

A: Given Data: Consider the diagram of the base as shown below with an element of thickness dx at a di...

Q: Name The wheel, having a two-foot radius rolls without slipping at constant speed on the ground. The...

A: Hello. Since your question has multiple sub-parts, we will solve the first three sub-parts for you. ...

Q: A frame ABC is supported in part by cable DBE that passes through a frictionless ring at B. Knowing ...

A: Writing the position vector of point B, D & E in matrix form as shown below – Calculating vecto...

Q: Draw Moment (M) and Shear (V) Diagrams. ( show all work)

A: Draw Free body diagram of the beam, Now, apply the force equilibrium in horizontal direction, Appl...

Q: Why is it that inorganic glasses form upon relatively slow cooling of melts, while rapid solidificat...

A: Glass: it is an amorphous supercooled liquid which is hard and brittle. Glasses are formed by rapidl...

Q: How do I find the direction of vE (I think), which is theta=18.4 deg from the -y-axis? This is a dyn...

A: Click to see the answer

Q: Draw the shear and bending-moment diagrams for the beam AB, and determine the maximum absolute value...

A: Draw the free-body diagram of the beam, Now, apply force equilibrium in horizontal direction, Appl...

Q: hat the car 1920s model year (MY) look like? What systems it has, what it didn’t have.

A: In the 1920s, in the United States Henry Ford innovated mass-production techniques that became stand...

Q: A 2-m-long and 3-m-wide horizontal rectangular plate is submerged in water. The distance of the top ...

A: Consider Psubmerged as pressure due to pressure due to the submerged plate in water and Patm is the ...

Q: Determine the X and Y direction force components of the following force system

A: Solution : First, we draw the free body diagram as shown below:

Q: Determine the magnitudes of the reactions at A and B for the beam loaded as shown.

A: Consider RA as the reaction at point A and RB as the reaction at point B. Draw the free-body diagram...

Q: This is a Dynamics question. Answers: w = 65.6 rad/s, alpha = 205.3 rad/s2

A: Calculate the angle turned when the disk turned 5 revolutions,

Q: F13–15. The 2-Mg car is traveling along the curved road described by r = (50e2") m, where e is in ra...

A: Express the path in polar coordinates. Assume radial acceleration to be directed towards the positiv...

Q: Write clearly and explain.

A: Understand that the uniform heat generated is one-dimensional, steady-state conduction. Write the ex...

Q: the oil pressure light stay on whatever the engine fis running, and the oil pressure has been checke...

A: Oil pressure light indicates that the pressure of the oil is within the specified limits. It will tu...

Q: Given this equation for converting temperature from Celsius (c) to Fahrenheit (f): f = (9/5)c + 32 ...

A: The equation for converting temperature from Celsius (c) to Fahrenheit (f) is

Q: 6-45. Determine the force in members BF, BG, and AB, and state if the members are in tension or comp...

A: Taking the section of truss by cutting member BG, BA, and FG. Taking the upper part to draw the FBD....

Q: How would a small or tight tolerance affect the layout?

A: The lines that are used for locating the points on the objects and items for the purpose of cutting,...

Q: A 10-kg object with a density of 900 kg/m3 is placed in a fluid with a density of 1100 kg/m3. The fr...

A: Given data: Mass of object, m = 10 kg Density of object, ρo = 900 kg/m3 Density of fluid, ρf = 1100 ...

Q: Can you answer the question on the picture and show your work neatly? thank you!

A: Let us divide the shaded area into 3 different sections as shown in the figure.

Q: I don't know how .3924 was gotten.

A: Initially carbon concentration = 0.25 wt% Temperature for heat treated = 9500 c Carbon concentrati...

Q: To understand rigid-body rotation about a translating axis. An exhausted bicyclist pedals somewhat e...

A: Given data as per question Tire’s radius = 23 cm calculations

Q: I do not understand the chapter in general. May you please explain why you completed each step as yo...

A: Drawing the T-S diagram for the Brayton cycle – Brayton cycle consists of two constant pressure h...

Q: COMPUTE THE DENSITY OF AIR INSIDE アて A IR CONDITIONED ROOM A TEMPEア PイC RE Of 20°C A PRESSURE WITH A...

A: Write the expression of converting temperature from degree Celsius to Kelvin.

Q: To use the principle of linear impulse and momentum to relate a force on an object to the resulting ...

A: Inclined angle = 200 Force acting = 265t N/s μs = 0.290 μk = 0.195, mass= 57.4 kg final velocity o...

Q: Name The wheel, having a two-foot radius rolls without slipping at constant speed on the ground. The...

A: Hello. Since your question has multiple sub-parts, we will solve the first three sub-parts for you. ...

Q: Consider a 5-m-diameter spherical gate holding a body of water whose height is equal to the diameter...

A: Given: The diameter of spherical gate, d = 5 m The density of water = 1000 kg/m3

Q: 77. Asketch of a manufactured part is given below the drawing. Sketch the planes of a datum referenc...

A: The datum is defined as the locus surfaces or the starting points for the location and orientation o...

Q: 78. Draw a datum target area and use a datum target symbol to specify size and identify target area ...

A: The datum is defined as the locus surfaces or the starting points for the location and orientation o...