Kubota m7060 lift height

Help Support CattleToday:

SmokinM

Well-known member
Joined
Oct 27, 2013
Messages
1,696
Reaction score
1,207
Location
Virginia
Anybody know how you adjust the lift arm height on an m7060? I know the holes in the arms but I believe there may be some adjustment elsewhere as travel distance is pretty minimal and doesn’t lift high at all. Never has so not a new issue just trying to get some more height. Thanks
 

Rockgrower

Member
Joined
Oct 20, 2014
Messages
7
Reaction score
0
I don't know if they are the same, but on a m9960 there is a lever beside the seat on the left side that regulates lift height.
 
OP
S

SmokinM

Well-known member
Joined
Oct 27, 2013
Messages
1,696
Reaction score
1,207
Location
Virginia
Sorry should have specified 3pt. Hitch but thanks for the link d2. I will look for the lever. Thanks
 
OP
S

SmokinM

Well-known member
Joined
Oct 27, 2013
Messages
1,696
Reaction score
1,207
Location
Virginia
Just an FYI if anybody else has one. There is a jam nut/ turnbuckle adjustable linkage on the top left hand side. It runs from the rock shaft to the rear ended housing. You can adjust it to change the height. It is fairly easy to do and you can get about 4” of adjustment. Unfortunately I needed about 8”. Just thought I would pass what I found along. Thanks for the help.
 
Top