Poulan named very well, you poulan that sob until it fires and then you poulan it some more.......
Jltrent what say you
- Thread starter skyhightree1
- Start date
Help Support CattleToday:
Nesikep
Well-known member
especially the new POS's from china.. those are total junk.. the older ones were alright, but I'd rather a european saw
No, but it fits my farm purposes perfectly. I still use my Sthil's too.
Last edited:
Will you keep us updated on when the sale will be and who is handling it?
I am not KT by any means, but the sale date is 4-3-21, Lee Auction, 39658 Veterans Memorial HWY, Pennington Gap VA. It is usually the same day as Pro Teams auction and I have to decide which to attend.
The sad part is Husqvarna bought out Poulan and the small orange Poulan saws (labeled Husqvarna) makes the company more money than the regular Husqvarna lineup. A lot of parts in all of them have China labeled on them and getting more sadly from what I have seen. We don't make much anymore on this side of the pond.
kenny thomas
Well-known member
It is part of the Lee Auction Company sale April 3rd.
OP
OP
skyhightree1
Well-known member
Iol I had to mess with you
Just throwing this out there, if you have a Makita or Dolmar saw, weedwacher etc. the gas engine company is no more and other than what is on the shelve old stock parts are NLA (No longer available). This reminds me of the older Partner saws as they were good, but NLA now.
Nesikep
Well-known member
I heard good things about the Makita/Dolmar 7100 and 7900's (I think those were the models)
I have bid on the 7900/7910s before but never went high enough. Their claim to fame was power to weight the strongest. The old Stihl 064 has that recognition and still does IMO. The porting/air flow/compression on the 064 cylinder is always better than the 066 cylinder and the saw weighs less. I just got through putting together an OEM Stihl 064 except an Italian made meteor piston added a few days ago and it is amazing the power it has for the weight. To cut with it and then go back to a 50-60cc saw you think you have a toy in your hands.
Here is the list power to weight as the 064 is not on it, probably due to age, but it will almost match a 066 and lighter in weight. Those Husqvarna's are strong, but they usually run just a little heavier which knocks them down the list.
Stihl 661 7.2hp 16.0lbs 2.22
Dolmar 7900 6.3hp 14.1lbs 2.23
Stihl 462 5.9hp 13.4lbs 2.27
Stihl 660 7.0hp 16.0lbs 2.28
Stihl 066 7.0hp 16.0lbs 2.28
Dolmar 7300 5.9hp 14.1lbs 2.38
Stihl 460 5.9hp 14.3 2.42
Husqvarna 394XP 7.0hp 17.4lbs 2.48
Husqvarna 385XP 6.3hp 15.7lbs 2.49
Husqvarna 390XP 6.3hp 15.8lbs 2.50
Husqvarna 572XP 5.8hp 14.6lbs 2.51
Stihl 440 5.4hp 13.7 2.53
Stihl 461 5.9hp 15.0 2.54
Dolmar 7910 5.8hp 15.0lbs 2.58
Stihl 441 5.5hp 14.7lbs 2.67
Stihl 362 4.7hp 12.6lbs 2.68
Husqvarna 576XP 5.5hp 14.8lbs 2.69
Dolmar 7310 5.4hp 14.6lbs 2.70
Stihl 261 4.0hp 10.8 lbs 2.70
Husqvarna 372XP 5.2hp 14.1lbs 2.71
Stihl 260 3.9hp 10.8lbs 2.76
Husqvarna 550XP 3.9hp 11.0lbs 2.82
Stihl 360 4.4hp 12.6lbs 2.86
Dolmar 6100 4.6hp 13.2lbs 2.86
Husqvarna 346XP 3.9hp 11.2lbs 2.87
Husqvarna 555 4.2hp 12.3lbs 2.92
Husqvarna 562XP 4.2hp 12.8lbs 3.04
Husqvarna 357XP 4.0hp 13.0lbs 3.25
Dolmar 5105 3.9hp 12.6lbs 3.30
Stihl 661 7.2hp 16.0lbs 2.22
Dolmar 7900 6.3hp 14.1lbs 2.23
Stihl 462 5.9hp 13.4lbs 2.27
Stihl 660 7.0hp 16.0lbs 2.28
Stihl 066 7.0hp 16.0lbs 2.28
Dolmar 7300 5.9hp 14.1lbs 2.38
Stihl 460 5.9hp 14.3 2.42
Husqvarna 394XP 7.0hp 17.4lbs 2.48
Husqvarna 385XP 6.3hp 15.7lbs 2.49
Husqvarna 390XP 6.3hp 15.8lbs 2.50
Husqvarna 572XP 5.8hp 14.6lbs 2.51
Stihl 440 5.4hp 13.7 2.53
Stihl 461 5.9hp 15.0 2.54
Dolmar 7910 5.8hp 15.0lbs 2.58
Stihl 441 5.5hp 14.7lbs 2.67
Stihl 362 4.7hp 12.6lbs 2.68
Husqvarna 576XP 5.5hp 14.8lbs 2.69
Dolmar 7310 5.4hp 14.6lbs 2.70
Stihl 261 4.0hp 10.8 lbs 2.70
Husqvarna 372XP 5.2hp 14.1lbs 2.71
Stihl 260 3.9hp 10.8lbs 2.76
Husqvarna 550XP 3.9hp 11.0lbs 2.82
Stihl 360 4.4hp 12.6lbs 2.86
Dolmar 6100 4.6hp 13.2lbs 2.86
Husqvarna 346XP 3.9hp 11.2lbs 2.87
Husqvarna 555 4.2hp 12.3lbs 2.92
Husqvarna 562XP 4.2hp 12.8lbs 3.04
Husqvarna 357XP 4.0hp 13.0lbs 3.25
Dolmar 5105 3.9hp 12.6lbs 3.30
Last edited:
Sky I found this on another site if you want more info...their overall take is similar to mine just not as direct
www.arboristsite.com
Four stroke chainsaw at Lowes
https://www.lowes.com/pd/SENIX-SENIX-CS4QL-L3-4QL-46CC-Gasoline-16-In-Chain-Saw-with-Auto-Release-Choke-16-in-Oregon-Bar-and-Chain-Automatic-Chain-Lubrication-and-Safety-Chain-Brake/5001661429 Anyone have experience with these? Obviously not pro level or meant for serious cutting, but it makes...
www.arboristsite.com
Nesikep
Well-known member
I have an 064 with an 066 top end, it's a healthy saw, but if I'm going to have to carry a 100cc saw around, I like the ported 394 best, even over the 2100's.
Perfect name! My stihl didn't crank today first time in 26 yrs.
I have two small husquavarnas that have less than 20 hrs. Costs $100 to fix each. Junked and got stiyl. Always ready to go. Have to be careful if your usin a lot now as style is not the same.
Originals had titanium sleeves and now they are ceramic. You have to tell them you want titanium. Ceramic are cheaper so they offer them to show great price.
