Jd566

[Ky cowboy]

We just bought a 97 566 round bale and I'm having trouble with the monitor. It has a flashing stop sign that won't clear, I went to the manual and it's terrible I did bale some with it but I had to manually wrap every bale the monitor would just tell me the diameter and pressure readings. Once it said near full but none of the auto wrap etc worked any thoughts

 

[SBMF 2015]

Some sencer or switch is probably sticking.

Does the monitor saw the gate is shut and locked?

Is the knife bar all the way back in the neutral position?

Is it throwing any codes like E1 04 or E2 10?

 

[Ky cowboy]

Some sencer or switch is probably sticking.

Does the monitor saw the gate is shut and locked?

Is the knife bar all the way back in the neutral position?

Is it throwing any codes like E1 04 or E2 10?

Shows gate shut
No codes (that I can tell)
And yes I can manually move the cutter bar back to the neutral position

 

[SBMF 2015]

Hmm,

Shows gate shut
No codes (that I can tell)
And yes I can manually move the cutter bar back to the neutral position

That's all that comes to me off the top of my head.

 

[Ky cowboy]

Hmm,

That's all that comes to me off the top of my head.

I'm afraid I have a problem in the harness. Trying to get. A neighbor come down and look at it

 

[SBMF 2015]

I'm afraid I have a problem in the harness. Trying to get. A neighbor come down and look at it

Has it done it since you hooked it up? Maybe one of the pins in the plug isn't making good contact.

 

[Ky cowboy]

Y

Has it done it since you hooked it up? Maybe one of the pins in the plug isn't making good contact.

it's been doing it from the beginning. I'll look at the plug good

 

[Silver]

Might want to flip the manual override switch for the time being?

 

[callmefence]

If it's working ok on manual my first hunch would be a sensor bad or just out of adjustment. Since the door closed, bale size and pressure indicate is working that eliminate s those. That leaves your knife and net feed sensors. I think..
Or like your thinking a harness or monitor issue.

 

[Silver]

Your owners manual will tell you how to get into diagnostic mode, you may learn something there.

 

[Silver]

Did you get this sorted out?