Looking at building about 3000' of electric fence as a cross fence to help with rotating. Im not up to speed on all the new gadgets out there. The idea is we will set metal corners pipes with a single dead man. Going to try out those galvanize pipes with the bolt in braces. There will be one gap about 1/2 way thru and a gate on each end. The plan will be to run 1 wire with pretty wide post spacing to start, then add more posts and more wire until its a solid 5 wire fence.
Any issues using barbed wire?
How far of spacing can I go the first year on tposts? 30' or more?
What is the best way to attach the wire to the corners?
If we decide to put a gate half way rather than a gap what is the best way to go around/ thru the gate?
Pictures and links are very helpful. :tiphat:
Any issues using barbed wire?
How far of spacing can I go the first year on tposts? 30' or more?
What is the best way to attach the wire to the corners?
If we decide to put a gate half way rather than a gap what is the best way to go around/ thru the gate?
Pictures and links are very helpful. :tiphat: