Curve in continuous fence

[Nutmegger]

A few years ago we built a corral that was curved. We layed out the posts using a long tape, then use a skidsteer to "draw" the continuous fence into the curve where it could be welded to the post. The panels were on the inside of the curve.

I'm wondering if anybody knows the minimum radius curve that can be made with a continuous panel? (Without kinking it)

Thanks in advance for sharing your thoughts.

 

[backhoeboogie]

A few years ago we built a corral that was curved. We layed out the posts using a long tape, then use a skidsteer to "draw" the continuous fence into the curve where it could be welded to the post. The panels were on the inside of the curve.

I'm wondering if anybody knows the minimum radius curve that can be made with a continuous panel? (Without kinking it)

Thanks in advance for sharing your thoughts.

I have 16 footers in a 180 degree turn. Hoop house design welded to tube steel base.