Bungee gate problem

[cowperson]

I have bungee gates and they keep shorting out. The rope burns at the handle and the opposite end. Does anyone know how to resolve this issue? Thanks

 

[Ouachita]

I just tried googling "bungee" ….. "rope burns" "gate" "opposite end"…….so I'd know what you're talking about. Not doing that again.

 

[redcowsrule33]

These might help, makes a better connection with the rope and makes the unstable part metal on metal.

Quick connectors

 

[sstterry]

I have bungee gates and they keep shorting out. The rope burns at the handle and the opposite end. Does anyone know how to resolve this issue? Thanks

Redcows is correct. If the connection to the poly at the handle is not tight, it will spark and burn. I prefer Spring Gates for uses like this.

 

[cowperson]

Thanks everyone

 

[greybeard]

Redcows is correct. If the connection to the poly at the handle is not tight, it will spark and burn. I prefer Spring Gates for uses like this.

but do try to wait till the dew dries off the handle...

 

[sstterry]

but do try to wait till the dew dries off the handle...

That is a lesson I learned as a teen! Especially with a 32 joule charger!

 

[cowperson]

Tech support says there needs to be an hot insulated wire under ground before putting bungee on and the handle of the bungee rope would be connected to the heat and the other end of the bungee would be terminal. Has anyone been told this before?