MCFD120
Member
Good afternoon everybody we've been looking at a new roller its a Vermeer 504r signature. Anybody running one? If so whats your thoughts?
What happened to the baler?I have put 700 bales through mine. It is a good baler but not perfect. It eats hay very well and is very hard to plug, but the netwrap is finicky. It misses about 1 in every 50 bales completely, and wads the wrap up in the middle on about twice that often. The twine has been flawless. But it did go down half way through first cutting and has been in the shop waiting on parts for a few weeks. The dealer gave me a 504 classic demo to finish up with.
I have one 1500 rolls through it. It makes a great bale. I use net wrap all I can, in fact I still have twine in it I put in day I got it. this roller replaced a 504 Super I. I take it to dealer every fall and he has done updates to it. I did 190 rolls on two Farms about two miles apart Monday from 11:00 to 7:00.Good afternoon everybody we've been looking at a new roller its a Vermeer 504r signature. Anybody running one? If so whats your thoughts?
Ouch.The latch did not release when the gate tried to open. Both hydraulic cylinders were pretziled.
I use the 53" net wrap. I haul on a inline trailer and wrap stays on sliding bales up the trailer.I replaced my NH644 with one and actually kept the NH for 3 years just in case I needed it. Finally sold NH this spring as I have never pulled it out of shed. I have had very little issues and that is usually my fault trying to put some wet material in it. Son-in-Law was putting a roll through every 2.5 minutes this spring. But that was in a field that averaged over 5 rolls an acre, hay moisture was about as good as it gets, and windrows straight and full.
Would definitely purchase again. Have ~1500 rolls through with only grease, cleaning, and oiling. I have never used the twine, just the net wrap. I like the 53" net wrap.
I can't tell you nothing about the 504RSignture. But if you haven't bought it yet.Good afternoon everybody we've been looking at a new roller its a Vermeer 504r signature. Anybody running one? If so whats your thoughts?
Another good feature of the 504RP is that it has grease bunks inside both doors. 5 on each side. I like it because not only is it quick and easy to grease most of the baler. But helps to avoid missing a bearing, possibly causing a dry bearing fire.I can't tell you nothing about the 504RSignture. But if you haven't bought it yet.
I can tell you this much I would think it would be a good baler. I got the 504RPremium silage baler. Not had it long, bought it new. Have baled a thousand bales so far and hasn't missed a bale. You can use either twine or net. Because it is a silage baler, the hay is chopped up for the most part. Because of that and that i use the heavy metal ring feeders. There is little if any waste of hay.
Wet or green hay won't slow it down. Because of the wide mouth and roller at front of the pick up. It will run through heavy wind rows.
It's been well worth the money for me. Would highly recommend it. The only thing it is a 4x5 baler but, puts up a heavier bale than most 4x5,s. Haven't weighed one to see just how heavy a bale it makes.
But, we ran two Vermeer balers on a field. One guy moving them off the feild. I saw this happen but he was telling the story while we took a beer thirty break after finishing the field.
He said he had to quit picking up the bales with his back hay fork because they weighed more and was causing his front end to come off the ground when he let the clutch out.
I am pretty sure the 504RP brochure says it puts out a 1000 lb bale. Of course there are alot that factors into bale weight that can cause bale weight to vary from time to time.
I can't tell you nothing about the 504RSignture. But if you haven't bought it yet.
I can tell you this much I would think it would be a good baler. I got the 504RPremium silage baler. Not had it long, bought it new. Have baled a thousand bales so far and hasn't missed a bale. You can use either twine or net. Because it is a silage baler, the hay is chopped up for the most part. Because of that and that i use the heavy metal ring feeders. There is little if any waste of hay.
Wet or green hay won't slow it down. Because of the wide mouth and roller at front of the pick up. It will run through heavy wind rows.
It's been well worth the money for me. Would highly recommend it. The only thing it is a 4x5 baler but, puts up a heavier bale than most 4x5,s. Haven't weighed one to see just how heavy a bale it makes.
But, we ran two Vermeer balers on a field. One guy moving them off the feild. I saw this happen but he was telling the story while we took a beer thirty break after finishing the field.
He said he had to quit picking up the bales with his back hay fork because they weighed more and was causing his front end to come off the ground when he let the clutch out.
I am pretty sure the 504RP brochure says it puts out a 1000 lb bale. Of course there are alot that factors into bale weight that can cause bale weight to vary from time to time.
I can't tell you nothing about the 504RSignture. But if you haven't bought it yet.
I can tell you this much I would think it would be a good baler. I got the 504RPremium silage baler. Not had it long, bought it new. Have baled a thousand bales so far and hasn't missed a bale. You can use either twine or net. Because it is a silage baler, the hay is chopped up for the most part. Because of that and that i use the heavy metal ring feeders. There is little if any waste of hay.
Wet or green hay won't slow it down. Because of the wide mouth and roller at front of the pick up. It will run through heavy wind rows.
It's been well worth the money for me. Would highly recommend it. The only thing it is a 4x5 baler but, puts up a heavier bale than most 4x5,s. Haven't weighed one to see just how heavy a bale it makes.
But, we ran two Vermeer balers on a field. One guy moving them off the feild. I saw this happen but he was telling the story while we took a beer thirty break after finishing the field.
He said he had to quit picking up the bales with his back hay fork because they weighed more and was causing his front end to come off the ground when he let the clutch out.
I am pretty sure the 504RP brochure says it puts out a 1000 lb bale. Of course there are alot that factors into bale weight that can cause bale weight to vary from time to time.
How are you weighing them ? Truck scales, cattle scales ?I have weighed the bales out of my signature. In 16% mosture hay they average 875 lbs. I buy about a third of my hay and weigh a few from each person I buy from every year. I have saw 4x5 bales weighed as little as 500 lbs. Most are around 700 lbs. Very few bales weigh as much as people think with dry grass hay.
I weigh the one at a time with cattle scales.How are you weighing them ? Truck scales, cattle scales ?