Recent content by snichols264

7.5-16 is a little bit taller and a little bit narrower than what you have, but should fit OK. Mine came with the same tire size as yours has, and the hankooks fit. They have always lasted along time for me, with only one flat in several years, whereas the Chinese tires I haven’t replaced get...

Hankook f19

You can remove the two screws holding the latch to the mount and it is easy to get to and weld. Mark where the latch is positioned before you take the screws out and you might avoid having to adjust it. There is enough adjustment that the position you weld it on at isn’t super critical, but the...

Heree (reply requires 5 or more letters, tricky OP)

He was the perfect example of "book learned" and "school of hard knocks learned"

Dun, I think you are on to something with the BOT deal. I posted about a Hobart welder and the next topic I clicked on had an ad for a Hobart welder at the bottom. I think we should exploit the bot's weakness and post words like the profession that involves poles and dancing and see what kind of...

Nah, i think it just looks that way cause of poor photography angle and poor foot placement, probably be OK once you got her home.

I found a lincoln powerarc 4000 in excellent used shape for under $650. It does good enough for the somewhat heavier welding, although it won't do what the plug in lincoln box arc welder(don't remember the model). I have ran a Hobart 180 Handler both gas and flux cored off the powerarc's...

:lol2: How many $'s per pound would that work out to?

I believe its alittle late to dehorn the ones in the last two pictures. Sure do like the others though.

Have you had any more sightings since they lost their velvet?

I liked the trigger pull, but then again, I liked the LCR's trigger. The 642 may have spoiled you. I ended up with a LCP because it was so much easier to conceal; it shoots good and is reliable but must have at least a 10 pound trigger pull.

They feel and look similar to the LCR. It seemed to me the LCR is alittle better made; didn't really like the cylinder release on the S&W. But I sure wouldn't turn one down if the price was cheap. I did like the laser setup on it.

Baytril and Banamine have always worked wonders for me.

I've never burned my head, but I did burn my retinas or eyeballs while welding when I was a 6 or 7 years old. I was trying to build a live trap for mice out of large nails. There were lots of little tack welds, so I just shut my eyes rather than wear the welding helment. I'll never forget that...