Page 1 of 1

Repeater syringe

Posted: Wed Apr 03, 2019 12:59 pm
by Texas Gal
Anyone have a favorite brand/model? or one to definitely avoid??

Thanks!

Re: Repeater syringe

Posted: Wed Apr 03, 2019 1:17 pm
by bse
I used prymatec for years, changed to allflex slot better

Re: Repeater syringe

Posted: Wed Apr 03, 2019 1:26 pm
by Nesikep
I have an allflex 2cc.. works alright
[url=https://postimages.org/]Image

Re: Repeater syringe

Posted: Wed Apr 03, 2019 5:52 pm
by Lucky
I’ve been doing some looking at these the last few days too. Looks like Allflex and nj phillips are the two brands most like. The less expensive ideal brand seems to only last a working or two. Might be one of those deals were you get what you pay for. Hard to pay $75 for one when the other brand is $25 though.

Re: Repeater syringe

Posted: Wed Apr 03, 2019 6:39 pm
by Chocolate Cow2
I have two of these.
https://www.qcsupply.com/140462-socorex ... older.html
They were about $120 apiece when I bought mine. Their accuracy in metering out vaccine is incredible.

Re: Repeater syringe

Posted: Wed Apr 03, 2019 6:58 pm
by snoopdog
We like the allflex , ours are adjustable to 5cc, one with the bottle holder, and one barrel type, I would definitely reccomend the bottle holder type for those of us who have arthritic symptoms. Money well spent imo.

Re: Repeater syringe

Posted: Thu Apr 04, 2019 5:59 am
by Ebenezer
Some of the cheap ones are inaccurate. Even the mostly metal ones. Had an import one from maybe Germany. It was not cheap. The drive cog wore out in a few years to administer the vaccine. Alflex is dependable and accurate and you can get replacement barrels O rings, ...

Re: Repeater syringe

Posted: Thu Apr 04, 2019 9:22 am
by Bcompton53
Allflex here. I have one 50cc and one of the bottle holder 5cc. I like both. Just be sure to put some lube on the orings after you sanitize them after use. (or buy lots of replacements to have on hand). Repeaters are lifesavers for me. My farm help is whatever family members happen to be around, and it's much easier to say, "inject here, and just squeeze until it stops" rather than, "see this 3 line? don't go past it!".